Berner Energy Recovery
Berner Energy Recovery Ventilators Provide Fresh Outside Air and Remove Stale Indoor Air.
Why Buildings Need Energy Recovery Ventilation Systems
We
live, work, and play in totally enclosed spaces that recirculate as much as 90%
of the conditioned air. People breathe in oxygen and breathe out carbon dioxide.
This decrease in oxygen creates unsafe indoor air quality, resulting in an
environment that has highly concentrated germs and airborne contaminants.
Traditionally heating and cooling costs are lowered when recirculating indoor air, but indoor air quality is dangerously compromised. New building codes have started to address this by requiring about 20% more fresh air to be introduced through the heating/cooling systems. Fresh air that does not go through an Energy Recovery Ventilator is too hot and humid, or too cold and dry, resulting in increased heating and cooling costs.
Berner Energy Recovery Ventilators provide fresh air to meet (or exceed) new building code requirements, at operating costs equal to or lower than recirculated indoor air. Imagine the quality of air you would breathe at 50% or even 100% fresh air inside your buildings.
Berner Ventilation Equipment is the Solution for Indoor Air Quality Concerns
Berner’s ventilation equipment uses two air streams (Supply and
Exhaust) and a triangular plenum to solve your indoor air quality concerns. The
Supply air stream brings fresh air into the building. The Exhaust air stream
takes stale air out of the building. The triangular plenum allows for equipment
that is the lightest and quietest with the smallest footprint per cfm in the
industry. The two air streams travel in opposite directions through the rotating
Enthalpy Recovery Wheel, transferring energy and moisture from one air stream to
the other. In the winter, valuable heat and humidity are transferred to the
incoming fresh air. In the summer, unwanted heat and humidity are removed from
the incoming fresh air. The result is a dramatic reduction in the building’s air
conditioning and heating load.
Berner makes fresh air affordable!
Berner
Energy offers complete packaged systems:
-
Supply and/or Exhaust Fans
-
Energy Recovery Cassettes
-
Total Heating/Cooling
-
Condenser, Heat Pump, etc. (Mounted, piped and charged with a single point power connection)
-
Heavy Filtration
-
Custom Design
Documents and Downloads
| Catalogs | ||||
| ERV | SFR | SRC | TRC | TRO |
| 3820 | 3820 | 3820 | 3820 | 3820 |
| 4830 | 4830 | 4830 | 4830 | 4830 |
| 5840 | 5840 | 5840 | 5840 | 5840 |
| 5855 | 5855 | 5855 | 5855 | 5855 |
| 6875 | 6875 | 6875 | 6875 | 6875 |
| 6895 | 6895 | 6895 | 6895 | 6895 |
| 7812 | 7812 | 7812 | 7812 | 7812 |
| 8815 | 8815 | 8815 | 8815 | 8815 |
| 9617 | 9617 | 9617 | 9617 | 9617 |
| 9620 | 9620 | 9620 | 9620 | 9620 |
| Flow Diagrams (Click here first for instructions) | |||
| No Heat | Coil Heat | Electric Heat | Gas Heat |
| Specifications | ||||
| ERV | SFR | SRC | TRC | TRO |